AMSOIL Foam Cannon

Tackle hard-to-reach areas with ease and ensure complete soap coverage, reducing the risk of wash-induced scratches and swirl marks throughout the wash process. The AMSOIL Foam Cannon produces thick, clinging layers of suds to lift dirt and is built with premium components designed to last and improve the washing experience. Its wide-mouth, wide-base design ensures easy filling and stability.

Specifications: 

Care Instructions: Following each use, rinse thoroughly with clean water. For best results, remove the reservoir and flush all soap residue from the foam cannon sprayer components and reservoir. Avoid the use of soaps, detergents or chemicals that contain particles, as they may damage foam cannon sprayer components.

Directions for Foam Cannon:

1. Follow all instructions and safety guidelines for your specific pressure washer. 
2. For optimum results, mix 2 oz. of AMSOIL High-Foam Car Shampoo with fresh or deionized water in the AMSOIL Foam Cannon reservoir. 
3. Before connecting the reservoir to the spray nozzle, ensure the hose tube is attached to the fitting located on the underside of the nozzle. 
4. Ensure proper connection to your pressure washer. 
5. Adjust soap dilution ratio by turning the valve located on top of the nozzle. 
6. Adjust the spray pattern by twisting the gray end of the nozzle. 
7. Adjust the spray orientation by twisting the black section of the nozzle.
8. Pull the pressure washer trigger and spray the entire vehicle in sweeping motions, until full foam coverage is achieved.
9. Allow the foam to sit on the vehicle for a few minutes to break down dirt and grime, lifting contaminants to the surface. Do not let it dry.
10. For optimum results, use the AMSOIL Wash Mitt to gently scrub the vehicle’s surface.
11. Once the foam has loosened the contaminants, rinse off with the pressure washer starting from the top and working your way down.