Restore Power and Performance with Newly Reformulated AMSOIL P.I. Gasoline Additive
Newly reformulated AMSOIL P.I. (Performance Improver) provides unsurpassed fuel economy and performance. Today’s fuels vary in quality and additive treat levels. Although a certain level of detergent additive is required by law to be formulated into gasoline, cost restrictions cause refineries to use low quality additives in the lowest additive concentration (LAC), a level insufficient to prevent deposit accumulation. As a result, deposits accumulate on fuel injectors, intake valves and combustion chambers, often within just a few thousand miles, disrupting spray patterns, affecting electronic sensors and causing a multitude of problems.
The newly formulated AMSOIL P.I. Performance Improver is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits, eliminating the need for expensive fuel injector cleaning procedures. The product is ideal for use prior to emissions inspections. It also helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits, testing showed AMSOIL P.I. provided the following clean-up benefits after only one tank of gasoline:
• Improves fuel mileage an average of 2.3% and up to 5.7%
• Reduced emissions
~ hydrocarbons (HC) up to 15%
~ carbon monoxide (CO) up to 26%
~ nitrous oxides (NOx) up to 17%
• Restored power and performance
• Reduced need for costly higher octane fuel
• Reduced noise from carbon rap and pre-ignition
• Better drivability
• Smoother operation
Usage Recommendations: Treat one full tank of gas every 4,000 miles or 100 hours of service. One bottle treats 20 gallons of gas. Do not treat and run more than 40 gallons of gas per treatment. P.I. helps pass emissions tests. Treat gas, run that tank and fill up again prior to test. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10% ethanol blended gas. Ideally, P.I. should be poured into the tank prior to filling it up with gas, but it will mix thoroughly when added after fill-up through normal agitation from driving.
About the Company: AMSOIL has been the recognized leader in synthetic lubrication and filtration since 1972. For more information about AMSOIL Ea Filters with Nanofiber Technology contact your nearest AMSOIL distributor.
News Contact:
Ed Newman
Marketing & Advertising Manager
————————————————————————
New Energy Saving, Fuel Efficient AMSOIL 100% Synthetic 0W-20 Motor Oil
AMSOIL INC. of Superior, Wisconsin, has introduced a new energy saving, fuel efficient synthetic oil, AMSOIL 100% Synthetic 0W-20 Motor Oil. Several vehicle manufacturers, including Ford, Honda, DaimlerChrylser and Toyota, recommend either a 0W-20 or 5W-20 motor oil in many of the vehicles they produce, increasing demand for these oils. The new AMSOIL 100% Synthetic 0W-20 Motor Oil provides maximum protection in a light viscosity for up to 25,000 miles or one year, whichever comes first.
Product Description
AMSOIL 100% Synthetic 0W-20 Motor Oil delivers extraordinary lubrication for automotive gasoline engines. Formulated with the industry’s premier synthetic technology and additives in a light viscosity formulation, it withstands high temperatures and delivers outstanding fuel economy and cold temperature performance. AMSOIL Synthetic 0W-20 Motor Oil delivers long-lasting performance and protection, extending drain intervals far beyond those recommended for conventional oils. Its unique synthetic formulation and long drain additive system are very stable, resisting oxidation and neutralizing acids.
By delivering the best possible engine protection, cleanliness and performance over extended drain intervals, AMSOIL Synthetic 0W-20 Motor Oil reduces vehicle maintenance and waste oil disposal costs. AMSOIL Synthetic 0W-20 Motor Oil is designed to maximize energy efficiency for improved fuel economy. Its light viscosity properties reduce drag, while its uniform molecular structure helps it flow more freely to reduce friction between metal surfaces.
With its shear stable formulation and high viscosity index, AMSOIL Synthetic 0W-20 Motor Oil provides excellent viscosity film strength to separate metal surfaces and contains robust anti-wear additives for the best possible engine protection.
AMSOIL Synthetic 0W-20 Motor Oil resists thermal breakdown better than conventional oils. It is heavily fortified with detergent and dispersant additives to prevent sludge deposits and keep engines clean. And unlike conventional oils, AMSOIL Synthetic 0W-20 Motor Oil contains no wax. It stays fluid down to -65°F for improved cold temperature oil flow, reduced bearing wear and easier starting.
About the Company: AMSOIL has been the recognized leader in synthetic lubrication and filtration since 1972. For more information about AMSOIL Ea Filters with Nanofiber Technology contact your nearest AMSOIL distributor.
News Contact:
Ed Newman
Marketing & Advertising Manager
